# Copyright (c) 2021 PaddlePaddle Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import math

from paddle.optimizer.lr import LambdaDecay, LRScheduler

__all__ = [
    "LinearDecayWithWarmup",
    "ConstScheduleWithWarmup",
    "CosineDecayWithWarmup",
    "PolyDecayWithWarmup",
    "CosineAnnealingWithWarmupDecay",
    "LinearAnnealingWithWarmupDecay",
]


def is_integer(number):
    return isinstance(number, int)


class CosineAnnealingWithWarmupDecay(LRScheduler):
    def __init__(self, max_lr, min_lr, warmup_step, decay_step, last_epoch=-1, verbose=False):
        self.decay_step = decay_step
        self.warmup_step = warmup_step
        self.max_lr = max_lr
        self.min_lr = min_lr
        super(CosineAnnealingWithWarmupDecay, self).__init__(max_lr, last_epoch, verbose)

    def get_lr(self):
        if self.warmup_step > 0 and self.last_epoch <= self.warmup_step:
            return float(self.max_lr) * (self.last_epoch) / self.warmup_step

        if self.last_epoch > self.decay_step:
            return self.min_lr

        num_step_ = self.last_epoch - self.warmup_step
        decay_step_ = self.decay_step - self.warmup_step
        decay_ratio = float(num_step_) / float(decay_step_)
        coeff = 0.5 * (math.cos(math.pi * decay_ratio) + 1.0)
        return self.min_lr + coeff * (self.max_lr - self.min_lr)


class LinearAnnealingWithWarmupDecay(LRScheduler):
    def __init__(self, max_lr, min_lr, warmup_step, decay_step, last_epoch=-1, verbose=False):

        self.decay_step = decay_step
        self.warmup_step = warmup_step
        self.max_lr = max_lr
        self.min_lr = min_lr
        super(LinearAnnealingWithWarmupDecay, self).__init__(max_lr, last_epoch, verbose)

    def get_lr(self):
        if self.warmup_step > 0 and self.last_epoch <= self.warmup_step:
            return float(self.max_lr) * (self.last_epoch) / self.warmup_step

        if self.last_epoch > self.decay_step:
            return self.min_lr

        num_step_ = self.last_epoch - self.warmup_step
        decay_step_ = self.decay_step - self.warmup_step
        decay_ratio = float(num_step_) / float(decay_step_)
        coeff = 1.0 - decay_ratio
        return self.min_lr + coeff * (self.max_lr - self.min_lr)


class LinearDecayWithWarmup(LambdaDecay):
    """
    Creates a learning rate scheduler, which increases learning rate linearly
    from 0 to given `learning_rate`, after this warmup period learning rate
    would be decreased linearly from the base learning rate to 0.

    Args:
        learning_rate (float):
            The base learning rate. It is a python float number.
        total_steps (int):
            The number of training steps.
        warmup (int or float):
            If int, it means the number of steps for warmup. If float, it means
            the proportion of warmup in total training steps.
        last_epoch (int, optional):
            The index of last epoch. It can be set to restart training. If
            None, it means initial learning rate.
            Defaults to -1.
        verbose (bool, optional):
            If True, prints a message to stdout for each update.
            Defaults to False.

    Examples:

        .. code-block:: python

            from paddlenlp.transformers import LinearDecayWithWarmup
            lr, warmup_steps, max_steps = 0.1, 100, 1000
            lr_scheduler = LinearDecayWithWarmup(lr, max_steps, warmup_steps)

    """

    def __init__(self, learning_rate, total_steps, warmup, last_epoch=-1, verbose=False):
        warmup_steps = warmup if is_integer(warmup) else int(math.floor(warmup * total_steps))

        def lr_lambda(current_step):
            if current_step < warmup_steps:
                return float(current_step) / float(max(1, warmup_steps))
            return max(0.0, float(total_steps - current_step) / float(max(1, total_steps - warmup_steps)))

        super(LinearDecayWithWarmup, self).__init__(learning_rate, lr_lambda, last_epoch, verbose)


class ConstScheduleWithWarmup(LambdaDecay):
    """
    Creates a learning rate scheduler, which increases learning rate linearly
    from 0 to given `learning_rate` during warmup periods and keeps learning
    rate a constant after that.

    Args:
        learning_rate (float):
            The base learning rate. It is a python float number.
        warmup (int or float):
            If int, it means the number of steps for warmup. If float, it means
            the proportion of warmup in total training steps.
        total_steps (int, optional):
            The number of training steps. If `warmup` is a float number,
            `total_steps` must be provided.
            Defaults to None.
        last_epoch (int, optional):
            The index of last epoch. It can be set to restart training. If
            None, it means initial learning rate.
            Defaults to -1.

    Examples:

        .. code-block:: python

            from paddlenlp.transformers import ConstScheduleWithWarmup
            lr, warmup_steps = 0.1, 100
            lr_scheduler = ConstScheduleWithWarmup(lr, warmup_steps)

    """

    def __init__(self, learning_rate, warmup, total_steps=None, last_epoch=-1, verbose=False):
        warmup_steps = warmup if is_integer(warmup) else int(math.floor(warmup * total_steps))
        if is_integer(warmup):
            warmup_steps = warmup
        elif total_steps:
            warmup_steps = int(math.floor(warmup * total_steps))
        else:
            raise ValueError(
                "Please provide total steps if `warmup` is a float number , or provide integer for argument `warmup`."
            )

        def lr_lambda(current_step):
            if current_step < warmup_steps:
                return float(current_step) / float(max(1.0, warmup_steps))
            return 1.0

        super(ConstScheduleWithWarmup, self).__init__(learning_rate, lr_lambda, last_epoch, verbose)


class CosineDecayWithWarmup(LambdaDecay):
    """
    Creates a learning rate scheduler, which increases learning rate linearly
    from 0 to given `learning_rate`, after this warmup period learning rate
    would be decreased following the values of the cosine function. If
    `with_hard_restarts` is True, the cosine function could have serveral hard
    restarts.

    Args:
        learning_rate (float):
            The base learning rate. It is a python float number.
        total_steps (int):
            The number of training steps.
        warmup (int or float):
            If int, it means the number of steps for warmup. If float, it means
            the proportion of warmup in total training steps.
        with_hard_restarts (bool):
            Whether cosine function has several hard restarts.
            Defaults to False.
        num_cycles (int or float, optional):
            If `with_hard_restarts` is False, it means the number of waves in
            cosine scheduler and should be an integer number and defaults to 1.
            If `with_hard_restarts` is True, it means the number of hard
            restarts to use and should be a float number and defaults to be 0.5.
            Defaults to None.
        last_epoch (int, optional):
            The index of last epoch. It can be set to restart training. If
            None, it means initial learning rate.
            Defaults to -1.

    Examples:

        .. code-block:: python

            from paddlenlp.transformers import CosineDecayWithWarmup
            lr, warmup_steps, max_steps = 0.1, 100, 1000
            lr_scheduler = CosineDecayWithWarmup(lr, max_steps, warmup_steps)

    """

    def __init__(
        self,
        learning_rate,
        total_steps,
        warmup,
        with_hard_restarts=False,
        num_cycles=None,
        last_epoch=-1,
        verbose=False,
    ):
        warmup_steps = warmup if is_integer(warmup) else int(math.floor(warmup * total_steps))
        # Input check
        if num_cycles is not None:
            assert (
                not with_hard_restarts
                and isinstance(num_cycles, int)
                or with_hard_restarts
                and isinstance(num_cycles, float)
            ), "`num_circles` should be an integer while `with_hard_restarts` is False, an float while `with_hard_restarts` is True."
        else:
            num_cycles = 1 if not with_hard_restarts else 0.5

        def lr_lambda(current_step):
            if current_step < warmup_steps:
                return float(current_step) / float(max(1, warmup_steps))

            progress = float(current_step - warmup_steps) / float(max(1, total_steps - warmup_steps))

            if with_hard_restarts:
                if progress >= 1.0:
                    return 0.0
                return max(0.0, 0.5 * (1.0 + math.cos(math.pi * ((float(num_cycles) * progress) % 1.0))))

            return max(0.0, 0.5 * (1.0 + math.cos(math.pi * float(num_cycles) * 2.0 * progress)))

        super(CosineDecayWithWarmup, self).__init__(learning_rate, lr_lambda, last_epoch, verbose)


class PolyDecayWithWarmup(LambdaDecay):
    """
    Creates a learning rate scheduler, which increases learning rate linearly
    from 0 to given `lr_init`, after this warmup period learning rate would
    be decreased as a polynomial decay from the base learning rate to the end
    learning rate `lr_end`.

    Args:
        learning_rate (float):
            The base learning rate. It is a python float number.
        total_steps (int):
            The number of training steps.
        warmup (int or float):
            If int, it means the number of steps for warmup. If float, it means
            the proportion of warmup in total training steps.
        lr_end (float, optional):
            The end learning rate.
            Defaults to 1e-7.
        power (float, optional):
            Power factor.
            Defaults to 1.0.
        last_epoch (int, optional):
            The index of last epoch. It can be set to restart training. If
            None, it means initial learning rate.
            Defaults to -1.

    Examples:

        .. code-block:: python

            from paddlenlp.transformers import PolyDecayWithWarmup
            lr, lr_end, warmup_steps, max_steps = 0.1, 1e-6, 100, 1000
            lr_scheduler = PolyDecayWithWarmup(lr, max_steps, warmup_steps, lr_end)

    """

    def __init__(self, learning_rate, total_steps, warmup, lr_end=1e-7, power=1.0, last_epoch=-1, verbose=False):
        lr_init = learning_rate
        assert (
            lr_init > lr_end
        ), f"`lr_end` must be be smaller than `learning_rate`. But `lr_end` is {lr_end} while `learning_rate` is {lr_init}."
        warmup_steps = warmup if is_integer(warmup) else int(math.floor(warmup * total_steps))

        def lr_lambda(current_step):
            if current_step < warmup_steps:
                return float(current_step) / float(max(1, warmup_steps))
            elif current_step > total_steps:
                return lr_end / lr_init  # it multiplies by lr_init equals to lr_end
            else:
                lr_range = lr_init - lr_end
                decay_steps = total_steps - warmup_steps
                pct_remaining = 1 - (current_step - warmup_steps) / decay_steps
                decay = lr_range * pct_remaining**power + lr_end
                return decay / lr_init  # it multiplies by lr_init equals to decay

        super(PolyDecayWithWarmup, self).__init__(lr_init, lr_lambda, last_epoch, verbose)